Interlogix NS3702-24P-4S Command Line Guide Instrukcja Użytkownika Strona 137
- Strona / 405
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
-137-
4.2.48.120 switchport hybrid acceptable-frame-type
Command:
switchport hybrid acceptable-frame-type all | tagged | untagged
switchport Switching mode characteristics
hybrid Change PVID for hybrid port
acceptable-frame-type Set acceptable frame type on a port.
all Allo w all frames
tagged Allow only tagged frames
untagged Allow only untagged frames
Default:
All
Usage Guide:
To configure acceptable-frame-type of Hybrid VLAN for specific interface
Example:
To configure acceptable-frame-type (tagged) of Hybrid VLAN for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport hybrid acceptable-frame-type tagged
4.2.48.121 switchport hybrid allowed vlan
Command:
switchport hybrid allowed vlan [all | none | add <vlan_list> | remove <vlan_list> |
except <vlan_list>]
switchport Switching mode characteristics
hybrid Change PVID for hybrid port
allowed Set allowed VLAN characteristics when interface is in hybrid mode
<vlan_list> VLAN IDs of the allowed VLANs when this port is in hybrid mode
add Add VLANs to the current list
all All VLANs
except All VLANs except the following
none No VLANs
remove Remove VLANs from the current list
- NS3702-24P-4S 1
- Command Line Guide 1
- Contents 3
- 1.1 Accessing the CLI 19
- 1.2 Command Line Modes 19
- 1.3 Requirements 20
- 2.1 Terminal Setup 21
- 2.2 Logon to the Console 23
- 2.3 Configuring IP Address 23
- Configuring IP Address 24
- 3.1 Telnet Login 26
- 4.1 clear 27
- 4.1.4 clear ip arp 28
- 4.1.23 clear ipv6 neighbors 36
- 4.1.28 clear lacp statistics 38
- 4.1.29 clear lldp statistics 38
- 4.1.37 clear mvr name 42
- 4.1.38 clear mvr statistics 42
- 4.1.39 clear mvr vlan 42
- GigabitEthernet 44
- 4.1.46 clear statistics * 45
- 4.2 configure terminal 46
- 4.2.13 access management 51
- 4.2.14 access-list ace 52
- 4.2.18 aggregation mode 55
- 4.2.19 aggregation mode 56
- 4.2.20 banner 57
- 4.2.21 banner exec 57
- 4.2.22 banner login 58
- 4.2.23 banner motd 59
- 4.2.24 clock summer-time 60
- 4.2.25 clock timezone 60
- 4.2.29 dot1x feature 62
- 4.2.30 dot1x guest-vlan 62
- 4.2.32 dot1x max-reauth-req 63
- 4.2.36 enable password 65
- 4.2.37 enable password level 65
- 4.2.38 enable secret 66
- 4.2.39 end 67
- 4.2.40 exit 67
- 4.2.43 gvrp 69
- 4.2.44 gvrp max-vlans 69
- 4.2.45 gvrp time 70
- 4.2.46 help 71
- 4.2.47 hostname 71
- 4.2.48.3 access-list logging 73
- 4.2.48.4 access-list policy 74
- 4.2.48.9 aggregation group 76
- 4.2.48.10 description 77
- 4.2.48.11 do 77
- 4.2.48.12 dot1x guest-vlan 78
- 4.2.48.13 dot1x port-control 78
- 4.2.48.14 dot1x radius-qos 79
- 4.2.48.15 dot1x radius-vlan 79
- 4.2.48.17 duplex 80
- 4.2.48.18 end 81
- 4.2.48.19 excessive-restart 82
- 4.2.48.20 exit 82
- 4.2.48.21 flowcontrol 83
- 4.2.48.34 ip verify source 89
- 4.2.48.40 lacp 92
- 4.2.48.41 lacp key 93
- 4.2.48.42 lacp port-priority 93
- 4.2.48.43 lacp role 94
- 4.2.48.44 lacp timeout 94
- 4.2.48.45 lldp cdp-aware 95
- 4.2.48.48 lldp receive 97
- 4.2.48.54 lldp transmit 100
- 4.2.48.55 loop-protect 100
- 4.2.48.60 media-type 103
- 4.2.48.61 mtu 103
- 4.2.48.63 mvr name 104
- 4.2.48.64 mvr vlan 105
- 4.2.48.67 ping ip 106
- 4.2.48.66 no 106
- 4.2.48.68 poe mode 107
- 4.2.48.69 poe pdcheck IP 108
- 4.2.48.70 poe pdcheck action 108
- 4.2.48.71 poe pdcheck enable 109
- 4.2.48.75 poe power limit 111
- 4.2.48.76 poe priority 111
- 4.2.48.77 poe time-range 112
- 4.2.48.78 port-security 113
- 4.2.48.82 pvlan 115
- 4.2.48.83 pvlan isolation 115
- 4.2.48.84 qos cos 116
- 4.2.48.85 qos dei 116
- 4.2.48.86 qos dpl 117
- 4.2.48.87 qos dscp-classify 117
- 4.2.48.88 qos dscp-remark 118
- 4.2.48.89 qos dscp-translate 118
- 4.2.48.90 qos map cos-tag 119
- 4.2.48.91 qos map tag-cos 120
- 4.2.48.92 qos pcp 121
- 4.2.48.93 qos policer 121
- 4.2.48.96 qos shaper 123
- 4.2.48.98 qos storm unicast 124
- 4.2.48.99 qos storm unknown 125
- 4.2.48.100 qos tag-remark 125
- 4.2.48.102 qos trust dscp 126
- 4.2.48.103 qos trust tag 127
- 4.2.48.106 shutdown 129
- 4.2.48.107 spanning-tree 129
- 4.2.48.116 speed 134
- 4.2.48.126 switchport mode 140
- 4.2.49 interface vlan 146
- 4.2.49.1 do 147
- 4.2.49.2 end 147
- 4.2.49.3 exit 148
- 4.2.49.4 ip address 148
- 4.2.49.5 ip address dhcp 149
- 4.2.49.7 ip dhcp server 150
- 4.2.49.8 ip igmp snooping 151
- 4.2.49.18 ipv6 address 157
- 4.2.49.19 ipv6 mld snooping 157
- 4.2.49.28 no 163
- 4.2.50 ip arp inspection 163
- 4.2.56 ip dhcp pool 167
- 4.2.56.1 broadcast 168
- 4.2.56.4 client-name 170
- 4.2.56.5 default-router 170
- 4.2.56.6 dns-server 171
- 4.2.56.7 do 171
- 4.2.56.8 domain-name 172
- 4.2.56.9 end 172
- 4.2.56.10 exit 173
- 4.2.56.11 hardware-address 174
- 4.2.56.12 host 174
- 4.2.56.13 lease 175
- 4.2.56.15 netbios-node-type 176
- 4.2.56.16 netbios-scope 176
- 4.2.56.17 network 177
- 4.2.56.18 nis-domain-name 178
- 4.2.56.19 nis-server 178
- 4.2.56.20 no 179
- 4.2.56.21 ntp-server 179
- 4.2.56.22 vendor 180
- 4.2.57 ip dns proxy 180
- 4.2.58 ip helper-address 181
- 4.2.60 ip http secure-server 182
- 4.2.61 ip igmp host-proxy 183
- 4.2.63 ip igmp snooping 184
- 4.2.64 ip igmp snooping vlan 184
- 4.2.65 ip igmp ssm-range 185
- 4.2.67 ip name-server 186
- 4.2.68 ip name-server dhcp 186
- 4.2.70 ip route 188
- 4.2.71 ip routing 188
- 4.2.73 ip ssh 190
- 4.2.74 ip verify source 190
- 4.2.76 ipmc profile 191
- 4.2.77.1 default range 192
- 4.2.77.2 description 193
- 4.2.77.3 do 193
- 4.2.77.4 end 194
- 4.2.77.5 exit 195
- 4.2.77.6 no 195
- 4.2.77.7 range 196
- 4.2.78 ipv6 mld host-proxy 196
- 4.2.80 ipv6 mld snooping 197
- 4.2.82 ipv6 mld ssm-range 198
- 4.2.84 ipv6 route 200
- 4.2.85 lacp system-priority 201
- 4.2.86 line 201
- 4.2.86.1 do 202
- 4.2.86.2 editing 202
- 4.2.86.3 end 203
- 4.2.86.4 exec-banner 203
- 4.2.86.5 exec-timeout 204
- 4.2.86.6 exec-timeout 205
- 4.2.86.7 exit 205
- 4.2.86.8 history size 206
- 4.2.86.9 length 206
- 4.2.86.10 location 207
- 4.2.86.11 motd-banner 207
- 4.2.86.12 no 208
- 4.2.86.13 privilege level 208
- 4.2.86.14 width 209
- 4.2.87 lldp holdtime 210
- 4.2.88 lldp med datum 210
- 4.2.89 lldp med fast 211
- 4.2.95 lldp reinit 215
- 4.2.96 lldp timer 215
- 4.2.98 logging host 217
- 4.2.99 logging level 217
- 4.2.100 logging on 218
- 4.2.101 loop-protect 218
- 4.2.106 monitor destination 221
- 4.2.107 monitor source 222
- 4.2.108 mvr 222
- 4.2.128 network-clock option 234
- 4.2.133 no 238
- 4.2.134 ntp 238
- 4.2.135 ntp server 239
- 4.2.137 poe management mode 240
- 4.2.140 poe sequential rule 242
- 4.2.141 poe supply 242
- 4.2.144 poe usage-threshold 244
- 4.2.145 poe-time-range 245
- 4.2.145.1 do 245
- 4.2.145.2 end 246
- 4.2.145.3 exit 246
- 4.2.145.4 no 247
- 4.2.145.5 periodic 247
- 4.2.145.6 reboot-only 248
- 4.2.146 port-security 249
- 4.2.147 port-security aging 250
- 4.2.149 privilege 251
- 4.2.150 qos map cos-dscp 252
- 4.2.152 qos map dscp-cos 254
- 4.2.155 qos qce 258
- 4.2.156 qos qce update 259
- 4.2.157 qos qce refresh 260
- 4.2.158 qos wred 261
- 4.2.163 radius-server host 264
- 4.2.164 radius-server key 265
- 4.2.167 rmon alarm 267
- 4.2.168 rmon event 268
- 4.2.170 snmp-server 269
- 4.2.171 snmp-server access 270
- 4.2.175 snmp-server host 273
- 4.2.175.1 do 273
- 4.2.175.2 end 274
- 4.2.175.3 exit 275
- 4.2.175.4 host 275
- 4.2.175.5 no 276
- 4.2.175.6 informs 276
- 4.2.175.7 shutdown 277
- 4.2.175.8 traps 278
- 4.2.175.9 version 278
- 4.2.176.1 do 280
- 4.2.176.2 end 280
- 4.2.176.3 exit 281
- 4.2.176.4 no 282
- 4.2.184 upnp 291
- 4.2.186 upnp ttl 292
- 4.2.187 username 293
- 4.2.188 vlan 294
- 4.2.188.1 do 294
- 4.2.188.2 end 295
- 4.2.188.3 exit 295
- 4.2.188.4 name 296
- 4.2.188.5 no 297
- 4.2.190 vlan protocol 298
- 4.2.191 voice vlan 299
- 4.2.193 voice vlan class 300
- 4.2.194 voice vlan oui 300
- 4.2.195 voice vlan vid 301
- 4.2.196 web privilege group 302
- 4.3 copy 302
- 4.3.1 copy 302
- 4.4 debug 303
- 4.4.1 debug 303
- 4.5 delete 304
- 4.5.1 delete 304
- 4.6 dir 305
- 4.6.1 dir 305
- 4.7 disable 305
- 4.7.1 disable 305
- 4.8.1 do 306
- 4.9 dot1x 307
- 4.9.1 dot1x initialize 307
- 4.10 enable 307
- 4.10.1 enable 307
- 4.11 exit 308
- 4.11.1 exit 308
- 4.12 firmware 308
- 4.12.1 firmware swap 308
- 4.12.2 firmware upgrade 309
- 4.13 ip 310
- 4.14 logout 310
- 4.14.1 logout 310
- 4.15 more 311
- 4.15.1 more 311
- 4.16 no 312
- 4.16.1 no 312
- 4.17 ping 312
- 4.17.1 ping ip 312
- 4.17.2 ping ipv6 313
- 4.18 reload 314
- 4.18.1 reload cold 314
- 4.18.2 reload defaults 315
- 4.19 send 315
- 4.19.1 send 315
- 4.20 show 316
- 4.20.1 show aaa 316
- 4.20.3 show access-list 317
- 4.20.4 show access-list 319
- 4.20.6 show aggregation 321
- 4.20.7 show aggregation mode 322
- 4.20.8 show clock 323
- 4.20.9 show clock detail 323
- 4.20.11 show dot1x status 326
- 4.20.12 show green-ethernet 327
- 4.20.15 show history 328
- 4.20.22 show interface vlan 333
- 4.20.23 show ip arp 334
- 4.20.26 show ip dhcp pool 337
- 4.20.27 show ip dhcp relay 338
- 4.20.28 show ip dhcp server 338
- 4.20.39 show ip route 346
- 4.20.41 show ip ssh 348
- 4.20.42 show ip statistics 348
- 4.20.44 show ipmc profile 351
- 4.20.45 show ipmc range 351
- 4.20.46 show ipv6 interface 352
- 4.20.49 show ipv6 neighbor 355
- 4.20.50 show ipv6 route 355
- 4.20.52 show lacp 358
- 4.20.53 show line 358
- 4.20.58 show logging 362
- 4.20.59 show loop-protect 363
- 4.20.61 show mvr 364
- 4.20.62 show network-clock 366
- 4.20.63 show ntp status 366
- 4.20.64 show platform phy 367
- 4.20.70 show privilege 371
- 4.20.71 show pvlan 372
- 4.20.72 show pvlan isolation 372
- 4.20.73 show qos 373
- 4.20.74 show radius-server 375
- 4.20.75 show rmon alarm 376
- 4.20.76 show rmon event 377
- 4.20.77 show rmon history 377
- 4.20.78 show rmon statistics 378
- 4.20.79 show running-config 379
- 4.20.80 show snmp 381
- 4.20.81 show snmp access 383
- 4.20.83 show snmp host 385
- 4.20.87 show snmp user 390
- 4.20.88 show snmp view 391
- 4.20.89 show spanning-tree 391
- 4.20.92 show terminal 394
- 4.20.93 show upnp 395
- 4.20.94 show users 395
- 4.20.95 show version 396
- 4.20.96 show vlan 397
- 4.20.98 show vlan mac 398
- 4.20.100 show voice vlan 400
- 4.21 terminal 403
- 4.21.1 terminal editing 403
- 4.21.4 terminal length 404
- 4.21.5 terminal width 405
Powiązane produkty i podręczniki dla Akcesoria komunikacja Interlogix NS3702-24P-4S Command Line Guide
(13 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.117 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji