Interlogix Concord 4 REV C Installation Manual Instrukcja Użytkownika Pobierz pdf (Strona 6)

6 Concord 4 Installation Guide

are adding (learning) into the panel memory to send

a signal to the panel.

7. To add another sensor to the same sensor group

and partition, repeat the process.

8. To add sensors to another sensor group or partition,

press * twice and repeat the process.

Table 8 below describes the factory default zone inputs.

Table 8: Zone factory programming

Zone input

Group number and description

10 - entry/exit

17 – instant interior follow er

13 – instant perimeter

If the panel memory is cleared, all onboard hardw ired zone factory

programming w ill be cleared.

Quick programming mode

Use the quick programming mode to program basic

system programming with a SuperBus 2000 fixed display

touchpad, SuperBus 2000 FTP 1000 touchpad, or any

SuperBus 2000 alphanumeric touchpad. The following

menus are accessible:

• Account number (all partitions)

• SC phone 1

• CS phone 2

• CS phone 3

• Learn sensors (limited to selecting sensor number, sensor

group, and partition assignment). An alphanumeric

touchpad is required for programming sensor text in

standard programming mode.

Use the A and B buttons to toggle across main menus

and use the # and * buttons to toggle up and down

through the submenus.

To enter quick programming mode:

1. Make sure the system is disarmed in all partitions.

2. Press 8, enter the installer/dealer code, and then

press 03.

The display shows ACCOUNT NUMBER.

3. Cycle through the menus as shown in Table 9

below.

Table 9: Quick programming menu structure

Account number

Partition number 1 to 6

Account number 00000

CS phone

CS phone 1

CS phone none

CS phone 2

CS phone none

CS phone 3

CS phone none

Learn sensors

Sensor partition number 1 to 6

Sensor group 0

Trip sensor number 1 to 96

End programming

1 2 3 4 5 6 7 8 9 10 11

Komentarze do niniejszej Instrukcji

Brak uwag

Interlogix Concord 4 REV C Installation Manual Instrukcja Użytkownika Strona 6

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Panel sterowania Interlogix Concord 4 REV C Installation Manual