Interlogix NX-4V2 Installation Guide Instrukcja Użytkownika Pobierz pdf (Strona 10)

CP-O1

feature description Feature description as shown in

manual

Program

location

Seg/opt Default CP-01required setting

Exit time and progress

annunciation/disable for

remote arm

This feature is not programmable in the panel. Exit time and progress are always

enabled.

Enabled (disabled for

remote arming)

Entry 1 delay 24 1 30 30 to 240 seconds Entry delays

Entry 2 delay 24 3 30 30 to 240 seconds

Abort window - for nonfire

zones

Dialer delay 40 8 30 Enabled (may be disabled

by zone/zone type, but no

cancel reports will be sent)

Abort window time - for

nonfire zones

Dialer delay 40 8 30 15 to 45 seconds

Abort annunciation This feature is not programmable in the panel. Flashing cancel LED goes off when

disarming.

Enabled

Cancel annunciation Cancel 23 3/6 Enabled Enabled

Duress feature Duress 44 Disabled Disabled

Two trips on cross zone 37 5/4 Disabled Required

Keypad sounds on cross zone trip 39 5 Disabled

Cross zoning

Zone type characteristic 111 3/4 Disabled

Programmable cross zoning

time

Cross zone time 40 6 5 minutes Allowed

Swinger shutdown Swinger shutdown count 38 n/a n/a For all nonfire zones, shut

down at 1 to 2 trips

Swinger shutdown disable Swinger shutdown count 38 n/a Enabled for 1 trip Allowed

Fire alarm verification Fire alarm verification time 40 9 Enabled for 1 trip Required (depends on

panel and sensors)

Call waiting cancel Must be programmed as part of

the phone number

0 n/a n/a Required (depends on

user phone line)

Recent closing 23 3/7 Enabled

Exit error 23 3/8 Enabled

Default changes (from prior

versions):

Power up delay 40 3 60 seconds

a> Refer to your keypad installation manual.

b> Combined abort window time and entry delay must not exceed one minute.

10 NX-4V2 Control Panel Installation Instructions

1 2 3 4 5 6 7 8 9 10

Komentarze do niniejszej Instrukcji

Brak uwag

Interlogix NX-4V2 Installation Guide Instrukcja Użytkownika Strona 10

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Panel sterowania Interlogix NX-4V2 Installation Guide